Camber alignment tool

Hanperal Universal Magnetic Gauge Tool for Car/Truck Camber/Castor Strut Wheel Alignment

Buy camber alignment tool
Check Price on Amazon
Buy camber alignment tool from Amazon.com

Description:

Feature:
1.Time and money saving device.
2.Weight: 256g/9.14oz
3.Measures the Camber and Caster angle on the wheel hub or brake disc.
4.Has a simple leveling adjustment from -5 degrees to 5 degrees.
5.It's allows to adjustment to maintain correct wheel alignment and even tyre wear.
6.This adjustable equipment allows you to return the strut to the original camber position after dismantlingThis adjustable equipment allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.
Instructions for use:
1. Remove the wheel alignment sensor (Clip tool), remove the tire;
2, The magnetic level gauge carefully on the side of the suction wheel disc brakes;
3, the water level was adjusted to zero;
4, install the required location specific parts;
5, use a special tool, with the degree of magnetic level gauge indication, adjust the positioning of the part to the desired measurement angle.
6, retest with locator If there is a little deviation, just to fine-tune the vehicle. (Usually a slight deviation does not cause fault location)

Buy camber alignment tool from Amazon.com
  • Easy to read and convenient to operate
  • There are super suction, two positioning blisters
  • Suitable for accurate checking of the castor and camber angle
  • Has a simple leveling adjustment from -5 degrees to 5 degrees
  • It's allows you to return the strut to the original camber position after dismantling and re-assembling






Buy camber alignment tool from Amazon.com


KIPA Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Tool for Truck Car RV Tire Repair

Buy camber alignment tool
Check Price on Amazon
Buy camber alignment tool from Amazon.com

Description:

This is An adjustable equipment allows you to return the strut to the original camber position
after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.
In-Kind Shooting

Specification:
Measures the Camber and Caster angle on the wheel hub or brake disc
Suitable for accurate checking of the castor and camber angle
Has a simple leveling adjustment from -5 degrees to 5 degrees
Magnetic gauge attaches to the hub or disc brake
Allows adjustment to maintain correct wheel alignment and even tyre wear
Time and money saving device
Easy to read and convenient to operate

Simple Instruction:

How to use:
1. Remove the wheel alignment sensor (Clip tool), remove the tire;
2, The magnetic level gauge carefully on the side of the suction wheel disc brakes;
3, the water level was adjusted to zero;
4, install the required location specific parts;
5, use a special tool, with the degree of magnetic level gauge indication, adjust the positioning of the part to the desired measurement angle.
6, retest with locator If there is a little deviation, just to fine-tune the vehicle. (Usually a slight deviation does not cause fault location)

Simple Reminder:
If you need very detailed adjustment instruction, You may search "wheel alignment tool" on youtube. There are some video

Buy camber alignment tool from Amazon.com
  • This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Measures the Camber and Caster angle on the wheel hub or brake disc. Suitable for accurate checking of the castor and camber angle
  • Wheel Alignment tool
  • Universial Automotive Tool For Wheel Alignment
  • It has a powerful magnet could be easily mounted on all kinds of metal surface.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level)
  • The body of gauge is made of high density aluminum and precision level vial, but the mount is made of metal so that please live it away from water, or maybe it will get rusty








Buy camber alignment tool from Amazon.com


Tenhulzen Auto 3300 2-Wheel Alignment System All-in-one Tool (Camber/Caster/Toe Plates)

Buy camber alignment tool
Check Price on Amazon
Buy camber alignment tool from Amazon.com

Description:

The Tenhulzen Automotive 2-Wheel Alignment System allows you to easily and accurately measure an axle's toe, camber, and caster.

Toe Measurement - Instead of crudely leaning against the tire like other brands, our product's stand-offs measure from the wheel rim itself, enabling more accurate measurements.

Camber Measurement - The gauge is accurate to 0.1 degrees and can be calibrated for non-level surfaces in seconds. This produces much more accurate results than the cheap bubble levels, which measure off the brake rotor.

Caster Measurement - Instead of requiring expensive turn plates to measure caster (like other brands), our product has turn plate functionality built in, making this a true all-in-one package!

Storage - The plates and tape measures snap together into one unit, making the package easy to store and carry, without the need for a separate case or bag.

Fitment: These are designed to for cars and SUV's. If you have a Lifted/4x4 vehicle, larger than stock offroad tires, or a commercial vehicle, the tire sidewall may be too tall for these to work. They will work with a sidewall height of up to around 7.5".


Perfect for:
-Aligning a vehicle after replacing suspension components (tie rods, etc.)
-Making camber/toe alignment changes in your garage, at the track, etc.
-Adjusting alignment to you personal desired specifications
-Checking alignment after going off track, hitting a pothole, etc.
-Saving money!!!


Includes:
-One 2-wheel plate with integrated camber gauge
-One standard 2-wheel plate
-2 High Resolution Tape Measures
-Tenhulzen Automotive Digital Readout
-Degrees Conversion Chart
-Video Instructions (written instructions also available for download)


****We are a USA owned and operated company and offer support 7 DAYS A WEEK****

Buy camber alignment tool from Amazon.com
  • All-In-One Tool Measures Camber, Caster, AND Toe!
  • Patent Pending wheel stand-offs provide unparalleled accuracy.
  • Camber Accurate to Within 0.1 Degrees (much better than a bubble gauge).
  • Expensive Turn Plates Are NOT Needed for Caster Measurment.
  • Detailed, Step by Step Video Instructions.







Buy camber alignment tool from Amazon.com


Longacre 52-78260 C.C. Gauge & Magnetic Ad

Buy camber alignment tool
Check Price on Amazon
Buy camber alignment tool from Amazon.com

Description:

Longacre is an established brand name in the racing industry and is recognized for dedication to quality, innovation and customer satisfaction. Check out our comprehensive line of race scales, alignment tools, racing gauges and other products. Whether you are into stock, modified, drag, go kart, off-road, sprint or RC car racing, we'll provide you with the quality racing parts you deserve.

Buy camber alignment tool from Amazon.com
  • Longacre Racing Products
  • Magnetic Adapter
  • Caster Camber Gauge



Buy camber alignment tool from Amazon.com


JohnDow Industries TC-614 Air-Assisted Multiple Camber Adjustment Tool

Buy camber alignment tool
Check Price on Amazon
Buy camber alignment tool from Amazon.com

Description:

Makes Camber adjustment a one-man job. Works on many GM and Chrysler vehicles using two-bolt lower strut mounts. Inflatable air bladder fits between tire and strut for easy and controlled adjustment of camber settings. 1. With strut mount bolts loosened, place the TOMCAT between the tire and strut. 2. Inflate the TOMCAT to push the wheel to a positive camber position. 3. To adjust the camber, slowly release air from the TOMCAT until the wheel retracts to the specified alignment setting. 4. Tighten the bolts and the adjustment is done.

Buy camber alignment tool from Amazon.com
  • 2' air hose and air bladder
  • Air control valve for inflating and controlled deflating
  • Safety relief valve to prevent overinflating
Buy camber alignment tool from Amazon.com


Granit Adjustable Magnetic Gauge Tool Camber Castor Strut Wheel Alignment Tool for Truck Car RV Tire Repair

Buy camber alignment tool
Check Price on Amazon
Buy camber alignment tool from Amazon.com

Description:

Thank you very much for choosing our product! Toe angle, camber angle(or inclination),scrub radius, caster angle, mechanical trail, kingpin angle, kingpin offset are very important performances to adjust the chassis of your car. This gauge could help you ensure if you have got the correct camber angle and caster angle. Also it could be used as a normal gradienter. The body of gauge is made of high density aluminum and precision level vial, but the mount is made of metal so that please live it away from water, or maybe it will get rusty.

Buy camber alignment tool from Amazon.com
  • 1.This adjustable gauge allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing. Measures the Camber and Caster angle on the wheel hub or brake disc. Suitable for accurate checking of the castor and camber angle.
  • 2.It has a powerful magnet could be easily mounted on all kinds of metal surface.(Note:Please double check and make sure the panel is balance before using.You could screw the button behind the gauge to adjust panel level)
  • 3.Also it could be used as a normal gradienter (Magnetic mount could be released).
  • 4.Size: 4.5''*1.2''*0.8'' It has a simple leveling adjustment from -5 degrees to 5 degrees
  • 5.The body of gauge is made of high density aluminum and precision level vial, but the mount is made of metal so that please live it away from water, or maybe it will get rusty.







Buy camber alignment tool from Amazon.com


Specialty Products Company 91000 FasTrax Camber/Caster Gauge for Wheels from 13" to 18"

Buy camber alignment tool
Check Price on Amazon
Buy camber alignment tool from Amazon.com

Description:

Specialty Products Company (SPC) 91000 Fastrax Camber/Caster Gauge (Fits most wheels from 13 inch to 18 inch) This great tool is a must for your garage. Portable, hands-free alignment can be done quickly and easily with the FasTrax Adjustable Camber/Caster Gauge. It includes gauge and wheel mount (fits most wheels from 13 inch to 18 inch). Displays Camber /-4 degree/Caster -4 degree to 12 degree. Saves time and tires. Accurate, rugged and easy-to-use. If you do any of these jobs in your garage - you need the FasTrax Camber/Caster Gauge: Install adjustable control arms, Replacing struts, Install adjustable bushings, Replace idler arms/tie rod ends, Collision repair estimates and Frame straightening.

Buy camber alignment tool from Amazon.com
  • Perform portable, hands-free alignment
  • Displays Camber /-4 degree/Caster -4 degree to 12 degree
  • Includes gauge and wheel mount (fits most wheels from 13 inch to 18 inch)
  • Accurate, rugged and easy-to-use
  • Saves time and tires

Buy camber alignment tool from Amazon.com


Longacre LON52-79501 Toe-in Plates

Buy camber alignment tool
Check Price on Amazon
Buy camber alignment tool from Amazon.com

Description:

Longacre is an established brand name in the racing industry and is recognized for dedication to quality, innovation and customer satisfaction. Check out our comprehensive line of race scales, alignment tools, racing gauges and other products. Whether you are into stock, modified, drag, go kart, off-road, sprint or RC car racing, we'll provide you with the quality racing parts you deserve.

Buy camber alignment tool from Amazon.com
  • Longacre Racing Products
  • Toe In
  • Plates


Buy camber alignment tool from Amazon.com


Tenhulzen Auto 1100 Hand-Held Camber Gauge with 0.1 Degrees Accuracy

Buy camber alignment tool
Check Price on Amazon
Buy camber alignment tool from Amazon.com

Description:


ATTENTION! - We also offer a product with the same camber and caster measuring capability, but which can also measure toe. Most of our customers purchase this upgrade because of the additional functionality it provides. Search "Tenhulzen Auto 3300" for more info


The Tenhulzen Automotive Hand-Held Camber Gauge was designed with budget oriented enthusiasts in mind. The efficient design allows it to be sold at a price everyone can afford, without making any sacrifices in accuracy or ease of use.

Perfect for:
Increasing your camber for track use
Dialing in different camber settings on a race car
Measuring caster without turn plates
Saving money!!!

Camber Measurement - The digital readout is accurate to within 0.1 degrees, and the gauge can be calibrated for non-level surfaces in a matter of seconds.
Caster Measurement - Instead of requiring expensive turn plates to measure caster (like other brands), our product has turn plate functionality built in!

Includes:
Hand-Held Camber Gauge Frame
Tenhulzen Automotive digital readout
Video instructions (written instructions also available for download)
Factory Support (Usually available 7 days a week, great for those weekend projects!)

Buy camber alignment tool from Amazon.com
  • Digital readout can be calibrated for non-level surfaces in a matter of seconds
  • Accurate to within 0.1 degrees
  • Plastic tipped contact points protect wheels from scratches
  • Fits 12"-20" wheels
  • Caster is measured without the need for expensive turn plates





Buy camber alignment tool from Amazon.com


Agile-Shop Universal Magnetic Gauge Tool For Car/Truck Camber Castor Strut Wheel Alignment

Buy camber alignment tool
Check Price on Amazon
Buy camber alignment tool from Amazon.com

Description:

Feature:
This adjustable equipment allows you to return the strut to the original camber position after dismantling and re-assembling the suspension or to check the amount of camber change before re-installing.
Time and money saving device.
Easy to read and convenient to operate.

Package Content:
1 x Magnetic Alignment Camber Castor Gauge

How to use:
1. Remove the wheel alignment sensor (Clip tool), remove the tire;
2, The magnetic level gauge carefully on the side of the suction wheel disc brakes;
3, the water level was adjusted to zero;
4, install the required location specific parts;
5, use a special tool, with the degree of magnetic level gauge indication, adjust the positioning of the part to the desired measurement angle.
6, retest with locator If there is a little deviation, just to fine-tune the vehicle. (Usually a slight deviation does not cause fault location)

Buy camber alignment tool from Amazon.com
  • Magnetic gauge the Camber and Caster angle on the wheel hub or brake disc
  • Suitable for accurate checking of the castor and camber angle
  • Has a simple leveling adjustment from -5 degrees to 5 degrees
  • With two positioning blisters
  • Allows adjustment to maintain correct wheel alignment and even tyre wear







Buy camber alignment tool from Amazon.com


Camber alignment tool