Reproduction Front Fender - 61100-377-000 - Honda CB350 CB400F
Reproduction Honda CB400F complete chrome front fender. See fitment note below for the CB350 twin. This chrome fender shines as a new fender should. Your bike is ready for you to remove that dented, rusty old fender and install a shiny new one!
Comes with 2 mounting brackets, hardware to install the brackets and a rubber grommet to hold the speedometer cable.
It does not come with hardware to secure the fender to the forks.
4 1/8" wide fender, 5 1/8" widest point where the brackets attach to the forks.
Replaces Honda part numbers: 61100-377-000, 61100-333-000XW
NOTE: The 1977 CB400F came with a fender that only had the rear bracket. This fender can be used on a '77 but it isn't identical to how it came stock. If you use one bracket there will be 2 holes visible in the fender where the front bracket mounts.
NOTE: Also fits 1972-1973 CB350K twin. There are several differences from the stock fender. Since this fender is designed to allow for disc brake, the left bracket is shaped to allow for the caliper mounting bracket. This is hidden behind the fork so it doesn't affect the look of the fender. There is also a visible bracket on the left rear fender stay, it holds the brake hose on front disc models, that can be removed or left in place.
CB350F - 1972-1974
CB350G - 1973 (disc brake model)
CB350K - 1972-1973 (***See fitment note above***)
CB400F Super Sport - 1975-1977 ('77 models came with one fender bracket. See fitment note above)
- Reproduction Honda CB400F complete chrome front fender. See fitment note below for the CB350 twin. This chrome fender shines as a new fender should. Your bike is ready for you to remove that dented, rusty old fender and install a shiny new one!
- Comes with 2 mounting brackets, hardware to install the brackets and a rubber grommet to hold the speedometer cable.
- Replaces Honda part numbers: 61100-377-000, 61100-333-000XW
- Check Fitment Below and Vin Ranges Below
- 4 1/8" wide fender, 5 1/8" widest point where the brackets attach to the forks.
Reproduction Grey Front Fender Grommet - 45451-283-000 - CB350 CB400F CB450 CB550 CB650 CB750
Reproduction grey cable grommet for the front fender on many of the 60's 70's and early 80's Honda's. This is the early style grey cable grommet that came stock on many of the early models such as the CB450K0, many of the later models came with the black grommet. This part is usually used to hold the speedometer cable, but it is also used to hold the front brake cable on some of the early models. Honda calls this a wire grommet, even though it is typically used to hold a cable in place. This grommet is soft and pliable so it's easy to install.
Honda Part Number: 45451-283-000 (grey) superceded by - 45451-367-690 (black)
We also have this grommet available in black.
CL175K Scrambler - 1970
CL175K Scrambler - 1972-1973
CB200T - 1975-1976
CB350F - 1972-1974
CB350G - 1973
CL350K - 1972-1973
CL350K - 1968-1969
CB360G - 1974
CB360T - 1975-1976
CL360K Scrambler - 1974-1975
CB400A - 1978
CB400T - 1980-1981
CB400TI - 1978-1979
CB400TII - 1978-1979
CB400F - 1975-1977
CB450K - 1965-1967
CB450K - 1970-1974
CL450K Scrambler - 1970-1973
CB500K - 1971-1973
CB500T - 1975-1976
CB550K - 1974-1978
CB550F Super Sport - 1975-1977
CB650 - 1979-1982
CB650C - 1980
CB750A Automatic - 1976-1978
CB750C - 1980-1981
CB750K - 1969-1982
CB750F Super Sport - 1975-1982
CB750L - 1979
CB900C - 1980-1982
CBX - 1979-1980
GL1000LTD - 1976
GL1100 - 1980-1982
fits 142 different honda models...
- fits over 142 Honda models
- Honda Part Number: 45451-283-000 (grey) superceded by - 45451-367-690 (black)
- Check Fitment Below
- 23 monitor stand
- Chelsea bags for women
- Halloween rubber stamp
- Nabi tablet protectors
- Arcadia home santa boot stocking
- Copper media converter
- Coconut charcoal teeth whitening